Beyond Surveying and Engineering

Newsroom

R.A. Smith National, Inc. - Newsroom

R.A. Smith National is Designing the Reconstruction of Calhoun Road for the City of Brookfield

by Karen Wiesneski 24. March 2017 10:13

R.A. Smith National has been retained by the City of Brookfield to provide design services for the reconstruction of Calhoun Road from just north of County M (North Avenue) to just south of WIS 190 (Capitol Drive). R.A. Smith National is providing transportation design, traffic engineering, surveying, stormwater management and ecological services for the Calhoun Road project.

The approximately two-mile stretch of Calhoun Road is being reconstructed to address deteriorated pavement, current and future traffic volumes, poor sight distances, and a rough Canadian Pacific Railroad crossing. The surrounding land use consists mainly of single-family residential properties with commercial properties at either end and between two railroad crossings. Fairview South School, Victory International Fellowship Church, and the Sikh Religious Society of Wisconsin also border the project.

The Calhoun Road corridor serves as a critical link for the traveling public as a north-south arterial in the center of Brookfield. The improvements to this segment of Calhoun will complement, and add to the continuity of, other portions of the Calhoun Road corridor that have previously been reconstructed. R.A. Smith National also designed the 1.3-mile reconstruction of Calhoun from WIS 59 (Greenfield Avenue) to US 18 (Bluemound Road) under I-94, including the replacement of the I-94 bridges over Calhoun Road. The project was constructed in 2008 and 2009.

R.A. Smith National’s Chapman, Wandschneider, Harrocks and Sims Obtain the Latest UAS (Drone) Pilot Certification from the Federal Aviation Administration

by Karen Wiesneski 20. February 2017 05:37

UAS Services Are Among the Advanced Survey Technologies Offered at R.A. Smith National

R.A. Smith National’s Jon Chapman and Bill Wandschneider of the firm’s Brookfield, Wis. office and John Harrocks and David Sims of the firm’s Oakmont (Pittsburgh office) have each obtained the newest certification available from the Federal Aviation Administration (FAA) for flying a UAS (unmanned aircraft system, also known as a drone) for commercial purposes. On August 29, 2016, the FAA authorized 14 CFR Part 107, which covers a broad spectrum of commercial uses for drones weighing less than 55 pounds, including the establishment of the Part 107 remote pilot certification.

R.A. Smith National has used UAS technology for a variety of project applications for both public and private sector clients, including topographic and planimetric mapping, volumetric surveying, orthorectified imagery and inspection imagery (building facades, utility towers, erosion monitoring and erosion control inspection), and others.

Advantages of using UAS technology include enhanced data collection on a wide range of projects; ability to better map areas that may otherwise be difficult or unsafe to traverse; and in certain instances, a more cost-effective means of collecting data versus traditional methods.

R.A. Smith National has been at the forefront of expertise in UAS technology having obtained a Section 333 Exemption and associated blanket COA (certificate of authorization) from the FAA in 2015. The firm originally began using the technology in 2015 for research and development. The survey division at R.A. Smith National was able to quickly move into offering UAS services based on the staff’s technical aptitude and their 14 years of experience in the use of advanced survey technologies that include LiDAR capture (also known as 3D laser scanning) and data extraction/3D modeling. 

Richard Smith, president, is excited about the opportunities that advanced survey technologies have brought to R.A. Smith National and its clients. “At R.A. Smith National we are always looking for ways to save our clients time and money. The use of advanced survey technologies and the speed at which they are growing are phenomenal,” said Smith. “It’s exciting to see our staff using the latest technologies to more accurately and cost effectively collect survey data and overcome challenges that are plaguing our clients. While LiDAR capture as well as UAS services are becoming more mainstream in our industry, we believe that our staff excels not only in the use of these tools, but also in their real world application. We have been very successful in the integration of advanced survey technologies as extensions of our conventional surveying practices and only employ new solutions after they have been proven and vetted through sound research and development. We are excited about expanding our UAS services and will be making additional investments in this area in the near future.”

A UAS can be used to collect data and imagery that is processed using photogrammetric software to create 3D digital maps.

Powered by BlogEngine.NET 2.0.0.36

Media Contacts

Karen Wiesneski
(262) 317-3292
Fax (262) 901-2263
Email

Chuck Stevens
(262) 317-3384
Email

Month List